It takes a lot of being a craftsperson, the designs, the brainwork and of course the tools. Out of the many tools you’ll need to achieve your dream project, the scroll saw is one of the “must-haves”.
A scroll saw is a power tool used to cut intricate designs on wood, metal, plastic and other materials. This tool brings out the true aesthetics of your project with different blade sizes that take note of every detail needed.
It feels great using a scroll saw, especially when you do it the right way. Bear in mind that a scroll saw requires safety measures that shouldn’t be ignored to avoid accidents that might possibly occur.
Here are a few steps to follow if you want to use a scroll saw without ruining your project: before learn what is the best scroll saw
How to Use a Scroll Saw
Step 1: Be Safe
There are so many accidents that can occur when using a scroll saw, it’s just like every other saw with a sharp blade, so you need to protect yourself. Always remember to;
- wear your safety goggles
- use a dust mask to cover your mouth and nose
- make sure your hair is properly packed or more preferably, wear a hat
- Roll up your sleeves or anything that can get caught up in the blade’s motion
- Make sure the scroll blade is properly mounted on your workspace and all bolts and nuts are tight.
Step 2: Set Up Your Wood
This isn’t so hard, all you have to do is cut your wood to the perfect size and dimension you need for your design, use a sander to smoothen out the surface of your wood, draw the design on your wood as guidelines with a pencil (make sure all pencil marks are visible enough).
Step 3: Set Up Your Scroll Saw
To ensure that your project doesn’t go bad, you need to make sure the scroll saw is set the right way. Each project has a different scroll blade set up and here are a few you should know:
- Using the right blade for the right size: smaller blades are more suitable for thinner woods and more delicate designs while bigger blades are used for thicker wood pieces. Basically, the thicker the wood, the bigger the blade used.
- Choosing the right speed: for less intricate designs, you can turn the speed up. Reduce the speed if you need to move slowly for designs that are more intricate.
Step 4: Check the Bade Tension to Make Sure it Stays Firm
Be sure that the blade is firm and will cut through accurately by pushing the blade a little bit, if this completely displaces the blade, it is not firm enough. You can also try something more fun by plucking it like a string if it makes a pretty sharp sound – it is firm enough.
Step 5: Take a Quick Test
Before you begin to saw and design your actual project, use a sample wood of the same thickness and height to see if your scroll saw set up is accurate. This is also an opportunity to confirm that you picked the right blade for the project you’re about to begin.
Be sure that the blower is working quite alright and the torch is bright enough for you to see your pencil marks on the wood, just in case your scroll saw doesn’t come with its own torch, get yourself a bright lamp.
Step 6: Work on Your Actual Project
Use both hands to carefully bring your wood closer to the blade, holding it firmly and follow your pencil markings carefully so you don’t saw out of place. Be careful not to put your hands anywhere close to the blade, it cuts the wood with ease, it can cut your fingers too.
Remember, slow and steady wins the race. Don’t rush or force your wood in, move it slowly, it’ll make it easier to achieve your desired design.
You shouldn’t experience any functional issue when working on your actual project if you did a proper scroll saw the test.
Step 7: Making a Perfect 90-degree Turn
When it’s time to make a 90-degree cut, you don’t necessarily have to turn off the scroll saw. All you have to do is draw your wood back, in such a way that the blade freely passes through the already-cut path and turn the wood so that the blade is facing the adjacent line and continue cutting.
Step 8: Finishing Up
After all cuttings have been done and your desired design has been achieved, sand the rough edges and turn off the scroll saw and keep it in a container.
You know what is the similarities and dissimilarities between the jigsaw and scroll saw? Lean it from scroll saw vs jigsaw